How to Add an Account on Amazon Fire Stick

Amazon's Fire TV Stick, also known simply as the Fire Stick, is a small piece of hardware that you can connect to your HDMI-enabled TV to turn a simple TV into an Android media center. The device's low cost and sophisticated features have earned it many fans since its launch three years ago. While the out-of-the-box Fire Stick experience is solid, you can use the Fire Stick for a lot more if you install additional optional software on it.

Today we will show you how to install SPMC on your Amazon Fire Stick . You may already be familiar with Kodi, the free open source media center software that you can install on all types of devices, including Fire Sticks. However, there is a special version of Kodi called SPMC which is specially designed for Android based devices like the Fire Stick. SPMC was created and maintained by the leading Android developer for Kodi, so despite being an unofficial fork of Kodi, it's extremely well-coded and delivers a consistent experience.

If you were to use SPMC and Kodi side by side, they would look pretty similar on the surface. After all, the main differences between the software are mostly small optimizations for Android as well as some small bug fixes. One useful thing to note is that SPMC and Kodi have different App IDs, so you can simultaneously install them on your device and test them out to see which one you prefer.

In general, we recommend using SPMC instead of Kodi on your Fire Stick due to its neat optimizations and fewer bugs. Here's how to install SPMC on your Fire Stick, then we'll show you how to use it to watch movies, TV shows, sports, and more.

One thing to keep in mind before you start is that you must first set up your Amazon account on your Fire Stick before installing any new apps. Although the SPMC app is free, you must have linked your Fire Stick to your Amazon account before you can download anything. So if you just got a new Fire Stick, go through the usual setup procedure before following the instructions below.

Why you should get a VPN before using SPMC

Before installing SPMC on your Fire Stick, you need to think about security. While the SPMC software itself is an offshoot of Kodi, which is free, open source, and completely legal to use, some of the add-ons that you can install on SPMC or Kodi allow you to stream copyrighted content, putting them into a legal gray area. You could face a fine or legal action for using these plugins over an insecure internet connection.

So how can you stay safe while using SPMC? The best thing to do is to use a VPN. This software encrypts all data sent by your device over the internet and is directed to a server managed by your VPN provider, where it is decrypted and sent. This means that no one can see if you are streaming content on the internet.

What features should a good VPN provider have? We believe that the most important are:

1. Fast connection speed
2. Support for different operating systems, in this case Android in particular
3. Many servers in many different countries
4. No registration

We recommend IPVanish

The VPN we recommend using with SPMC is IPVanish. It offers fast connection speeds, over 850 servers in over 60 countries, a strict no-logging policy, and software support for Android, as well as PC, Mac, and iOS. It meets all of our requirements and is easy to install and use.

EXCLUSIVE: Take advantage of a special offer for Addictive Tips readers - Get a whopping 60% discount on the annual plan, which equates to just $ 4,87 per month. There's even a 7-day money back guarantee so you can shop with confidence.

How to install SPMC on your Fire Stick

Once your Fire Stick is configured and your VPN installed, we can start installing SPMC on your Fire Stick. To do this, we must first enable installation of apps from unknown sources, then download SPMC from its developer's GitHub page and install it. Here are step-by-step instructions on how to do this:

1. Start on your Fire home page
2. Click on Parameters , And then Apparatus , And then Developer options
3. You will see switches to activate various options. The setting we want to change is the activation of apps from unknown sources and ADB debugging .
4. Return to your Fire home page
5. Now, make a click left for open the search function, then type Downloader to search for this app
6. You will see a great icon downloading orange for the application. Click on it
7. You will now see a screen with the details of the Downloader app. Click on Obtain in the menu at the bottom, then press OK
8. Once installed, which shouldn't take long, hit the button Open which replaces the button yellow Obtain on the app overview page (you can also support on the large orange icon to open the application from the start menu or applications)
9. A screen will open showing the new features of the application. Press OK to confirm
10. You will now see a text box when you can enter a file location to download it. Enter the URL of the file you want to download, which looks like this: https://github.com/koying/SPMC/releases/tag/16.7.0-spmc . Check again to make sure you typed it correctly, then press Go
11. This will open the developer's GitHub page. Since we are downloading from GitHub, that means you can be sure that you have the latest updated version of SPMC. Currently, SMPC is at version 16.7.0 which means it is equivalent to Kodi v16, also known as Jarvis. Use the red circle as your mouse and scroll to the Downloads section of the GitHub page
12. Click on the first link in the download section, titled SPMC-16.7.0-spmc-1e54f91-aarch64.apk
13. The file will start to download. Wait a second for the download to complete
14. Now a pop-up screen will appear asking if you want to install the SPMC app. Scroll to the bottom of the text and choose INSTALL
15. The installation will begin. Wait a minute for it to end
16. You will see a notification that the app is installed and ready to start
17. Select OPEN at the bottom of the screen
18. You will see the SPMC logo and the app will open
19. Here! The SPMC application is installed. Now we just have to set it up and you can start watching content on your Fire Stick.

How to set up SPMC on your Fire Stick

The basic version of SPMC is now installed on your Fire Stick. You can use the SPMC app to install any add-ons and skins that you want to customize for your use, and if you're experienced with Kodi, you can do that. But for new users, it can be confusing and time consuming to add new fonts and try to figure out which plugins work and which don't. Instead, we recommend that you install a version. A release is a prepackaged set of apps, fonts, and skins, so you only need to install one thing to fully customize your SPMC experience. The version we're going to recommend is from One Alliance, a well-known group of Kodi developers. This version has enough plugins that you can watch all the movies, TV shows, and sports you want, but not so many plugins that you will be overwhelmed.

Here's how to set up the One Alliance version on your Fire Stick:

1. From your Fire home page
2. Go to Applications and make scroll through the icons and click SPMC
3. When you open SPMC, you will see that it looks like Kodi v16, also known as Jarvis. So everything will be very familiar to experienced Kodi users. But if you're new to Kodi, don't worry, we can show you what to do.
4. Go to SYSTEM and File Manager
5. Go to Add source
6. An input box will appear on the screen. Enter this url: https://onealliance.xyz/repo/ , making sure you remember https: // and being careful to spell the URL exactly correctly. Click on OK and name the repository by typing in the input box below; we will call it "an alliance"
7. Return to the home screen, then go to SYSTEM and Parameters
8. Access to Additional modules
9. Select Install from zip file
10. navigate now towards onealliance , then find the file named plugin.program.onealliancewizard.zip and click on it
11. Wait for the notification that the repository has been installed. It may take a while, so please be patient.
12. Now go back to the plugins section and click on OneAlliance Assistant
13. The first time One Alliance is installed, a pop-up window will appear asking if you want to keep your settings. Select the settings you want to keep, and then press Continue
14. Another pop-up window will appear. Now press the Build menu
15. This will take you to a screen showing the OneAlliance builds. Scroll to item [16.2] OneAlliance Build (v3.0.2) and press ok
16. Now choose New installation and press OK
17. A pop-up window will ask you if you want to restore default settings before installation. Click on Continue
18. The wizard will start to download the version. Wait a few minutes while the download is in progress, as it may take a while.
19. A notification will ask you if you want to reload the profile or force it to close. Click on Force close
20. This will close the SPMC plugin. Now go back to the home screen of your Fire
21. Go to Applications and make scroll through the icons and click SPMC
22. When it opens, you will see that thanks to the One Alliance building, your SMPC has a new interface. Wait a few minutes while everything installs and updates
23. You are now ready to use SPMC!

How to use SPMC on your Fire Stick

Once the installation is complete, you can now use your Fire Stick to stream content and watch whatever you want.

When you open SPMC, you will see menu options like Live Sports, TV listings, On Demand, Music, Movies, TV Shows, and more. You will notice that you have installed the Aeon Nox mask for a different look. If you want to change this, go to SYSTEM, then Interface and select Mask. Click on the Skin button and you can revert to the default skin or install a new skin for a different look.

This version comes pre-installed with most of the most popular plugins to display all types of content, such as BOB Unrestricted, Elysium, BBC iPlayer, Exodus, Maverick TV, UK Turk Playlists, and many more. To use SPMC, just select any menu option like MOVIES, then choose an app from that menu like Elysium. This will take you to the plugin from where you can stream new releases, featured movies, top rated movies, etc. You can also go to the TV SHOWS menu option to view add-ons like Covenant that let you stream the latest episodes of TV shows. Finally, you can also go to LIVE SPORTS and choose from options like Nemesis which allow you to stream sporting events like soccer matches.

conclusion

You now have a Fire Stick loaded with SPMC and plugins preinstalled for streaming content and a new skin for a new look. Building an alliance is a great place to start for newbies, as you have all the essential basics covered.

If you're having trouble installing SPMC on your Fire Stick, please let us know in the comments below and we'll do our best to walk you through the process. Good viewing!

How to Add an Account on Amazon Fire Stick

Source: https://www.informatique-mania.com/en/linternet/comment-installer-spmc-sur-amazon-fire-stick/

Share this post